Description
2024 F-550 Super Cab with Palfinger PAL PRO 43-11 Field Service Crane Body
2024 F-550 Super Cab
- Engine: 6.7L 4V OHV Power Stroke V8 Turbo Diesel B20
- Transmission: TorqShift 10-Speed Automatic 10R140 with neutral idle – Includes SelectShift and selectable drive modes: normal, tow/haul, eco, slippery roads and off-road.
- Wheels: 19.5″ x 6″ Argent Painted Steel Hub covers | center ornaments not included
- HD Vinyl 40/20/40 Split Bench Seat – Includes center armrest, cupholder, storage, 2-way adjustable driver/passenger headrests and driver’s side manual lumbar
- Radio: AM/FM Stereo w/MP3 Player – Includes 6 speakers
- SYNC 4 Communications & Entertainment System – Includes enhanced voice recognition, 911 Assist, 8″ LCD center stack screen, AppLink, 1 smartcharging
- USB port and trailer brake controller
Palfinger PAL PRO 43-11 Field Service Crane Body
- 11′ length x 97.5″ width
- Entire body is epoxy primed and protected by submersion electro-coat process
- 60″ tall compartments on the driver’s side; first two compartments on the passenger’s side raised to 60″
- Compartment outside depth: 22″
- Eight recessed, swiveling cargo tie-downs in the floor
- Double-panel doors with internal stiffeners, adhered with structural adhesive
- Doors made from high-strength 5052-H32 aluminum
- “T” handle latches with seal compression feature and three-point latch rods, powder-coated black
- Gas strut door retainers
- Workbench bumper with integrated 2″ receiver hitch
- Master locking system
- 52″ high cab protector
DRIVERS SIDE COMPARTMENTS
First Vertical Compartment:
- Heavy-duty 250 lb. capacity C-Tech aluminum tool drawers with ball-bearing roller slides
- (5) 3″ drawers in the street-side front compartment (top of the stack)
- (2) 5″ drawers in the street-side front compartment (middle of the stack)
- (1) 7″ drawer in the street-side front compartment (bottom of the stack)
Second Vertical Compartment:
- Heavy-duty 250 lb. capacity C-Tech aluminum tool drawers with ball-bearing roller slides
- (5) 3″ drawers in the street-side front compartment (top of the stack)
- (2) 5″ drawers in the street-side front compartment (middle of the stack)
- (1) 7″ drawer in the street-side front compartment (bottom of the stack)
Horizontal Compartment:
- (2) adjustable shelves with divider slots and (4) dividers
Rear Vertical Compartment:
- (3) adjustable shelves
PASSENGERS SIDE COMPARTMENTS
First Vertical Compartment:
- Oxygen and acetylene torch tank brackets in the front of the compartment
- Louvered vent at the bottom
- (3) adjustable shelves located rearward of the partition
- Vertical partition with (3) swivel hooks in the rear
Second Vertical Compartment:
- 18-drawer C-Tech nut and bolt bin
Horizontal Compartment:
- (1) adjustable shelf with divider slots and (4) dividers
- 1/2″ x 50′ hose reel in the right rear compartment, with hose access through a roller fairlead
- Moisture separator, oiler, and regulator
LIGHTING
- LED tail and marker lights
- LED strip lighting inside compartments along door openings
- (4) LED work lights:
- (2) mounted at the rear of the body, one on each side
- (2) mounted at the front of the body, one on each side
STABILIZERS
- Rear stabilizers with power out (crane side only) and power down (both sides)
- Front manual drop-down stabilizer legs
ADDITIONAL FEATURES
- Miller welder mounting plate
- Palfinger PSC-8029 industrial field service crane:
- 43,000 ft.-lb. rating
- 8,000 lbs. capacity @ 3′ reach / 1,220 lbs. capacity @ 29′ reach
- 29′ hydraulic reach from centerline of rotation
- 120′ of 7/16″ wire rope
- LED boom tip lights
- Heavy-duty bed liner in the cargo area, compartment tops, bumper area, and front wall
- Palfinger PRC 45V rotary air compressor:
- Oil-flooded rotary screw compressor delivering 46 CFM @ 150 PSI on demand
- 6-gallon underbody air tank with ball valve bleeder for moisture
For More Information – contact Kurt at 248-773-3827
